![]() ![]() During these instances, no power is delivered to the load. In each cycle, the waves on each wire pass through zero amplitude twice at the same time (see Figure 1). To visualize this, think of the power as riding a wave, technically a sine wave with a defined frequency and amplitude. Importantly, the two current-carrying legs are always 180 degrees apart. In North America, it’s 60 times or 60 hertz (Hz). A full power cycle takes place during a 360-degree phase change, and the voltage reverses itself 50 or 60 times per second, depending on the system in use in different parts of the world. With AC power, the power current or voltage reverses periodically, flowing one way on the hot wire that delivers power to the load and the other way on the neutral wire. Single-phase AC power uses a three-wire delivery system consisting of one “hot” wire, a neutral wire, and a ground. So, what is 3-phase power, exactly? And where should we use it?īefore diving into that discussion, it’s helpful to start with an understanding of single-phase AC power. To support the same 15 kW rack using 3-phase power requires three wires capable of supplying 42 amps (AWG 10), which are a fraction of the size - each less than one-tenth of an inch in diameter. Because 3-phase is more efficient, it can deliver the same power (and more) using smaller wiring. Using single-phase at 120 volts AC (VAC) power, it takes 125 amps to power the rack, which would require a wire that’s almost one-quarter inch in diameter (AWG 4) - too thick to work with easily, not to mention expensive. At those kinds of levels, you naturally want to put a premium on efficiency, as even a small percentage improvement in power consumption will mean significant dollar savings over time. Today, that same rack may hold dozens of servers that collectively draw 20 or 30 kW. ![]() It wasn’t long ago that a single IT rack of 10 servers would draw a total of five kilowatts (kW) of power. More powerful computing systems are being packed into the same spaces that once housed servers that drew only a fraction of the electrical power that today’s computers and networks demand. The ability to deliver ever-increasing amounts of power is especially important as data centers and server rooms continue to see higher densities. On this page, we’ll explain why that’s the case and the key differences between single- and 3-phase power systems. Single-phase AC is the type commonly used for most household and light commercial applications, such as lighting and small appliances. There’s good reason for that, because 3-phase power can deliver more power with greater efficiency, as opposed to single-phase AC power. Three-phase alternating current (AC) power is commonly used to deliver electricity to data centers as well as commercial and industrial buildings that house power-hungry machinery.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |